Skill Simulator

printer setup
jitenderhsol
Views : 371 Upvotes : 0
Comments : 1
2024-03-22 09:34:26
Striker
Used Skill Points 0
  • Skill
  • Level
  • Tripod
  • Rune
  • Select Tripod
  • Triple Fist
    Triple Fist
    1
  • Sky Shattering Blow
    Sky Shattering Blow
    1
  • Lightning Kick
    Lightning Kick
    1
  • Flash Heat Fang
    Flash Heat Fang
    1
  • Moon Flash Kick
    Moon Flash Kick
    1
  • Violent Tiger
    Violent Tiger
    1
  • Storm Dragon Awakening
    Storm Dragon Awakening
    1
  • Sleeping Ascent Celebration
    Sleeping Ascent Celebration
    1
  • Berserk Circle
    Berserk Circle
    1
  • Swift Wind Kick
    Swift Wind Kick
    1
  • Phoenix Advent
    Phoenix Advent
    1
  • Lightning Whisper
    Lightning Whisper
    1
  • Sweeping Kick
    Sweeping Kick
    1
  • Esoteric Skill: Spiral Impact
    Esoteric Skill: Spiral Impact
    1
  • Esoteric Skill: Tiger Emerges
    Esoteric Skill: Tiger Emerges
    1
  • Esoteric Skill: Call the Wind God
    Esoteric Skill: Call the Wind God
    1
  • Esoteric Skill: Blast Formation
    Esoteric Skill: Blast Formation
    1
  • Esoteric Skill: Lightning Tiger Strike
    Esoteric Skill: Lightning Tiger Strike
    1
  • Level 1
    Fist of Darkness
    Fist of Darkness
    Lv. 1/5

    Element is now [Dark]. Crit Rate +15.0%. On hit, inflicts Darkness on foes for 3s.

    Esoteric Extortion
    Esoteric Extortion
    Lv. 1/5

    MP Cost +25.0%. On hit, Esoteric Meter +100.0%.

    Burning Hands
    Burning Hands
    Lv. 1/5

    Element is now [Fire]. Outgoing Damage +15.0%.

  • Level 2
    Sturdy Armor
    Sturdy Armor
    Lv. 1/5

    Leaves an afterimage to turn your body semi-transparent. During skill use, incoming Damage -40.0%.

    Growth Attack
    Growth Attack
    Lv. 1/5

    The first attack's outgoing Damage +15.0%. Outgoing Damage 15.0% each time the attack count increases.

    Ruthless
    Ruthless
    Lv. 1/5

    Damage to Staggered foes +50.0%.

  • Level 3
    Lightning God Fist
    Lightning God Fist
    Lv. 1/5

    Total move distance +1.8 meters. Atk. Speed +20%. The final strike inflicts +50.0% Damage to foes.

    5 Chain Fist
    5 Chain Fist
    Lv. 1/5

    Now unleashes 5 ruthless punches. Outgoing Damage +50.0%.

  • Level 1
    Excellent Mobility
    Excellent Mobility
    Lv. 1/5

    First kick's Move Distance +1.0 meter(s).

    Ascension Kick
    Ascension Kick
    Lv. 1/5

    2nd strike sends foes into the air. Distance and duration are increased.

    Swift Footwork
    Swift Footwork
    Lv. 1/5

    Atk. Speed +20.0%.

  • Level 2
    Water Dragon Kick
    Water Dragon Kick
    Lv. 1/5

    Element is now [Water]. On 2nd strike hit, freezes foes for 2.0s. Cooldown +6s.

    Wide Hit
    Wide Hit
    Lv. 1/5

    AoE Radius +20%.

    Blessing of the Wind
    Blessing of the Wind
    Lv. 1/5

    On 2nd hit, Atk. Speed +10.0% and Move Speed +10.0% for 3.0s.

  • Level 3
    Crushing Wind Kick
    Crushing Wind Kick
    Lv. 1/5

    The first strike changes to an outraged flurry. Counterattack is not possible. Total Damage to foes +150.0%.

    Abundant Resources
    Abundant Resources
    Lv. 1/5

    MP Cost +25.0%. Esoteric Meter +200.0%.

  • Level 1
    Sharp Movement
    Sharp Movement
    Lv. 1/5

    Allows you to change direction while using the skill. Move Distance +2.0 meter(s).

    Esoteric Extortion
    Esoteric Extortion
    Lv. 1/5

    MP Cost +25.0%. On powerful slam-down attack hit, Esoteric Meter +30.0%.

    Ruthless
    Ruthless
    Lv. 1/5

    Damage to Staggered foes +30.0%.

  • Level 2
    Thunder Kick
    Thunder Kick
    Lv. 1/5

    Slam foes down while airborne to inflict +30.0% Damage.

    Easy Target
    Easy Target
    Lv. 1/5

    Damage to Pushed foes +30.0%.

    Intense Shock
    Intense Shock
    Lv. 1/5

    Slam down on foes to inflict 17 Damage every 4s. On hit, inflict Electric Shock.

  • Level 3
    Heaven's Lightning
    Heaven's Lightning
    Lv. 1/5

    Adds a rapid strike after the spinning attack. Total Damage +60.0%.

    Flash Lightning
    Flash Lightning
    Lv. 1/5

    Changes to a powerful slam-down attack within 8 meters of the target location. On hit, Damage +15.0%.

  • Level 1
    Sacred Attack
    Sacred Attack
    Lv. 1/5

    Element is now [Holy]. On hit, Atk. Speed +5.0% for 3.0s. Stacks up to 4 times.

    Fist of Darkness
    Fist of Darkness
    Lv. 1/5

    Element is now [Dark]. Crit Rate +15.0%. On hit, inflicts Darkness on foes for 3s.

    Wide Hit
    Wide Hit
    Lv. 1/5

    AoE Radius +30%.

  • Level 2
    Master Hit
    Master Hit
    Lv. 1/5

    Changes to Holding mode. Unleash infinite punches for up to 2.5s with a finishing blow upon releasing the skill key. Damage boosted up to +80.0%.

    Quick Blow
    Quick Blow
    Lv. 1/5

    Attack 4 times with powerful punches while standing in place with a finishing strike that inflicts +20.0% Damage to foes.

    Weak Point Detection
    Weak Point Detection
    Lv. 1/5

    Damage to Push-Immune foes +60.0%.

  • Level 3
    Adrenaline Rush
    Adrenaline Rush
    Lv. 1/5

    Crit Rate +30.0%. Outgoing Damage +50.0%. Changes the final move to an uppercut and additional outgoing Damage +50.0% before Tripping foes.

    Enlightenment
    Enlightenment
    Lv. 1/5

    During skill use, grants Push Immunity. On hit, ignore foe Defense by 40.0%.

  • Level 1
    Flame Flash Kick
    Flame Flash Kick
    Lv. 1/5

    Element is now [Fire]. Burns foes when the rapid kick attack lands 4 times, inflicting 33 Damage every 1s for 5s .

    Intense Shock
    Intense Shock
    Lv. 1/5

    Element is now [Lightning]. Can now change the direction. On first charge attack hit, sends foes airborne, inflicting 24 Electric Shock Damage for 4s.

    White Flame Kick
    White Flame Kick
    Lv. 1/5

    MP Cost +25.0%. Esoteric Meter +50.0%.

  • Level 2
    Excellent Mobility
    Excellent Mobility
    Lv. 1/5

    First charge attack's Move Distance +3.0 meter(s). Cooldown -3.0.

    Light-Footed
    Light-Footed
    Lv. 1/5

    All AoE Radiuses +30%. Number of rapid kick attacks +100%.

    Single Hit
    Single Hit
    Lv. 1/5

    When attacking a single foe, Damage inflicted +50.0%.

  • Level 3
    Fancy Footwork
    Fancy Footwork
    Lv. 1/5

    Changes to Holding mode. Dash Attack Damage +40.0%. Unleashes rapid kicks. Damage +390.0% for up to 2s after charging.

    Full Moon Kick
    Full Moon Kick
    Lv. 1/5

    Changes to Normal mode. Charge forward and spin to land a finishing blow that inflicts +250.0% Damage.

  • Level 1
    Focus Attack
    Focus Attack
    Lv. 1/5

    Esoteric Meter gain -50.0%. Outgoing Damage +20.0%.

    Concussion
    Concussion
    Lv. 1/5

    Increases Stagger Level to [Mid].

    Vital Point Hit
    Vital Point Hit
    Lv. 1/5

    Crit Rate +15.0%.

  • Level 2
    Down Strike
    Down Strike
    Lv. 1/5

    Attacks the foe with an incredibly swift kick. Press the skill hotkey again to gather energy and attack the foe with a downward smash. Increases Damage to foe by up to 20.0%.

    Wide Hit
    Wide Hit
    Lv. 1/5

    AoE Radius +30%.

    Focus Hit
    Focus Hit
    Lv. 1/5

    Instantly rotate to launch a powerful forward kick. Outgoing Damage +30.0%.

  • Level 3
    Efficient Strike
    Efficient Strike
    Lv. 1/5

    MP consumption -50.0%. On skill use, cooldown -6.0s.

    Howangah
    Howangah
    Lv. 1/5

    Draws upon the power of the White Tiger. Crit Damage +150.0%.

  • Level 1
    Excellent Mobility
    Excellent Mobility
    Lv. 1/5

    Move Distance +2.0 meter(s) with the first kick.

    Swift Footwork
    Swift Footwork
    Lv. 1/5

    Atk. Speed +10.0%. Chain skill cooldown +1.0s.

    Esoteric Extortion
    Esoteric Extortion
    Lv. 1/5

    MP Cost +25.0%. On hit, Esoteric Meter +25.0%.

  • Level 2
    Easy Target
    Easy Target
    Lv. 1/5

    Damage to Pushed foes +50.0%.

    Enhanced Strike
    Enhanced Strike
    Lv. 1/5

    Outgoing Damage +30.0%.

    Law of the Jungle
    Law of the Jungle
    Lv. 1/5

    Damage to Challenge or lower foes +70.0%.

  • Level 3
    White Tiger Gak
    White Tiger Gak
    Lv. 1/5

    The final chain skill attack changes into a flying kick that channels the power of the White Tiger. Outgoing Damage +100.0%. The foe is also knocked back.

    Fallen Flower Gak
    Fallen Flower Gak
    Lv. 1/5

    Enhances the last chain skill attack. Damage inflicted by the last hit +100.0%. Foes hit by the last hit are thrown back into the air.

  • Level 1
    Spiral Kick
    Spiral Kick
    Lv. 1/5

    Increases spinning speed. Dash Attack AoE Radius + 10%. Atk. Speed +10.0%.

    Wide Hit
    Wide Hit
    Lv. 1/5

    Combo Attack AoE Radius +20%.

    Vital Point Strike
    Vital Point Strike
    Lv. 1/5

    Crit Rate +15.0%.

  • Level 2
    Quick Prep
    Quick Prep
    Lv. 1/5

    Cooldown -5.0s.

    Enhanced Strike
    Enhanced Strike
    Lv. 1/5

    When Charging, outgoing Damage +100.0%.

    Blessing of the Wind
    Blessing of the Wind
    Lv. 1/5

    On combo attack hit, Atk. Speed +10.0% and Move Speed +10.0% for 3.0s.

  • Level 3
    Leaf Sweep
    Leaf Sweep
    Lv. 1/5

    Changes the combo attack to Windmill, attacking in a wide 360 area and knocking down foes on hit. Windmill can be used while Charging.

    Rising Water Kick
    Rising Water Kick
    Lv. 1/5

    Element is now [Water]. A pillar of water surges up to knock foes into the air. Upper kick attack Damage +50.0%.

  • Level 1
    Focus Attack
    Focus Attack
    Lv. 1/5

    Esoteric Meter gain -50.0%. Outgoing Damage +10.0%.

    Magick Control
    Magick Control
    Lv. 1/5

    MP Cost -50.0%.

    Wide Hit
    Wide Hit
    Lv. 1/5

    AoE Radius +20%.

  • Level 2
    Absorption Hit
    Absorption Hit
    Lv. 1/5

    The range of the first hit increases to 4m and pulls foes within that range.

    Weak Point Detection
    Weak Point Detection
    Lv. 1/5

    Damage to Push-Immune foes +40.0%.

    Upright
    Upright
    Lv. 1/5

    Strikes the ground immediately without jumping and an explosion erupts right away without waiting for the first hit.

  • Level 3
    Glacial Explosion
    Glacial Explosion
    Lv. 1/5

    Element is now [Water]. In the first 3.0s, an ice explosion that freezes foes will occur. After 1s another ice explosion of a greater range will occur. Outgoing Damage +40.0%. Skill cooldown +6.0s.

    Volcanic Eruption
    Volcanic Eruption
    Lv. 1/5

    After attacking the ground, the explosion is delayed causing a bigger explosion. Outgoing Damage inflicted by the explosion +100.0%. With the Incorruptible Skill Tree, the explosion occurs 1s after striking the ground.

  • Level 1
    Lightning Round Kick
    Lightning Round Kick
    Lv. 1/5

    Element is now [Lightning]. Crit Rate +15.0%.

    Water Round Kick
    Water Round Kick
    Lv. 1/5

    Element is now [Water]. On hit, foe Atk. Speed -20.0% and Move Speed -40.0% for 2.0s.

    Fire Round Kick
    Fire Round Kick
    Lv. 1/5

    Element is now [Fire]. On hit, Burns foe, inflicting 31 Damage every 1s for 5s.

  • Level 2
    Wide Hit
    Wide Hit
    Lv. 1/5

    AoE Radius +20%.

    Quick Prep
    Quick Prep
    Lv. 1/5

    Cooldown -6.0s.

    Swift Footwork
    Swift Footwork
    Lv. 1/5

    Atk. Speed +20.0%.

  • Level 3
    Furious Spin Axis
    Furious Spin Axis
    Lv. 1/5

    Jump up diagonally to perform 4 spinning kicks before slamming down on foes. Outgoing Damage +30.0%.

    Extreme Training
    Extreme Training
    Lv. 1/5

    Kick duration +1s. Direction changes become easier. Total outgoing Damage +100%.

  • Level 1
    Wide Hit
    Wide Hit
    Lv. 1/5

    AoE Radius +20%.

    Easy Target
    Easy Target
    Lv. 1/5

    Damage to Pushed foes +20.0%.

    Fierce Heat
    Fierce Heat
    Lv. 1/5

    On hit, Burns foe, inflicting 24 Damage every 1s for 5s.

  • Level 2
    Ferocious Attack
    Ferocious Attack
    Lv. 1/5

    Fall from the air and cause an explosion upon landing, knocking hit foes into the air. Damage +25.0%.

    Weak Point Detection
    Weak Point Detection
    Lv. 1/5

    Damage to Push-Immune foes +40.0%.

    Freeze Effect
    Freeze Effect
    Lv. 1/5

    Element is now [Water]. On hit, freezes foes for 2.0s.

  • Level 3
    Nonstop Ambush
    Nonstop Ambush
    Lv. 1/5

    Changes to combo mode. Use the skill twice in a row. Cooldown +6.0s.

    Nimble Movement
    Nimble Movement
    Lv. 1/5

    Atk. Speed +20.0%. Move distance +70%.

  • Level 1
    Lightning's Blessing
    Lightning's Blessing
    Lv. 1/5

    Atk. Speed for all Party Members +8% within 24 meters.

    Wide Hit
    Wide Hit
    Lv. 1/5

    AoE Radius +20%.

    Esoteric Extortion
    Esoteric Extortion
    Lv. 1/5

    MP Cost +25.0%. On hit, Esoteric Meter +25.0%.

  • Level 2
    Quick Prep
    Quick Prep
    Lv. 1/5

    Cooldown -5.0s.

    Transferable Lightning
    Transferable Lightning
    Lv. 1/5

    On hit, inflict 101 lightning Damage every 1s for 6s. Lightning energy jumps 1 time to inflict 101 Damage for 3s to foes within 4 meters of the surrounding area.

    Afterimages of Lightning
    Afterimages of Lightning
    Lv. 1/5

    Thunderous Whisper duration +2.0s.

  • Level 3
    Fatal Lightning
    Fatal Lightning
    Lv. 1/5

    On hit, foe Crit Resistance -10%.

    Law of the Jungle
    Law of the Jungle
    Lv. 1/5

    Damage to Challenge or lower foes +80.0%.

  • Level 1
    Esoteric Extortion
    Esoteric Extortion
    Lv. 1/5

    MP Cost +25.0%. On hit, Esoteric Meter +25.0%.

    Weak Point Detection
    Weak Point Detection
    Lv. 1/5

    Damage to Push-Immune foes +30.0%.

    Keen Footwork
    Keen Footwork
    Lv. 1/5

    The 1st strike Paralyzes foes and knocks them back. No longer knocks foes down.

  • Level 2
    Light of Justice
    Light of Justice
    Lv. 1/5

    Element is now [Holy]. Sweeping Kick AoE Radius +20%. Atk. Speed +20.0%.

    Shadowcleave
    Shadowcleave
    Lv. 1/5

    Element is now [Dark]. Crit Rate +30.0%. The last kick attack inflicts Darkness on foes for 5s.

    Intense Shock
    Intense Shock
    Lv. 1/5

    Element is now [Lightning]. Foes hit by the last attack take 68 Damage every 4s and are affected by Electric Shock.

  • Level 3
    Pure Excellence
    Pure Excellence
    Lv. 1/5

    Lower your stance and gather energy at the bottom of your feet before jumping forward and performing 1 extreme kick, inflicting +150.0% Damage and knocking down foes. While gathering energy, Damage received is +30.0%.

    Exaggerated Ability
    Exaggerated Ability
    Lv. 1/5

    Simplifies kicks and allows you to perform a slamming kick upon using the skill again, inflicting Damage equal to 80.0% of Base Damage.

  • Level 1
    Weak Point Detection
    Weak Point Detection
    Lv. 1/5

    Damage to Push-Immune foes +30.0%.

    Wide Hit
    Wide Hit
    Lv. 1/5

    AoE Radius +20%.

    Absorption Hit
    Absorption Hit
    Lv. 1/5

    Grants Paralysis Immunity during Ready Attack. Creates a pattern that flaunts the power of Yin and Yang to pull in surrounding foes.

  • Level 2
    Swift Fingers
    Swift Fingers
    Lv. 1/5

    Atk. Speed +20.0%.

    Lucky Bubble
    Lucky Bubble
    Lv. 1/5

    30% chance to obtain 1 Esoteric Bubble.

    Blessing of the Wind
    Blessing of the Wind
    Lv. 1/5

    On hit, Atk. Speed +10.0% and Move Speed +10.0% for 4.0s.

  • Level 3
    Destruction Blow
    Destruction Blow
    Lv. 1/5

    Enhances destructive power. Outgoing Damage +50.0%.

    Meditation Blow
    Meditation Blow
    Lv. 1/5

    No longer knocks back foes. Stuns for 5s.

  • Level 1
    Tenacity
    Tenacity
    Lv. 1/5

    Gain Push Immunity during jump attacks.

    Sturdy Armor
    Sturdy Armor
    Lv. 1/5

    During skill use, incoming Damage -40.0%.

    Quick Prep
    Quick Prep
    Lv. 1/5

    Cooldown -5.0s.

  • Level 2
    Fist of Darkness
    Fist of Darkness
    Lv. 1/5

    Element is now [Dark]. Crit Rate +30.0%. On hit, inflicts Darkness on foes for 3s.

    Single Hit
    Single Hit
    Lv. 1/5

    When attacking a single foe, Damage inflicted +40.0%.

    Ring of Fire
    Ring of Fire
    Lv. 1/5

    On skill use, create a ring of fire, inflicting 101 [Fire] AoE Damage every 1s for 6.0s.

  • Level 3
    Hoseunggyuk
    Hoseunggyuk
    Lv. 1/5

    During the last attack, jumps even higher with the power of the White Tiger to strike the foe consecutively. Damage inflicted up to +80.0%.

    Ascension
    Ascension
    Lv. 1/5

    A giant tiger head shoots up and attacks on the last hit, inflicting an additional 85.0% of Base Damage in a 100% wider area.

  • Level 1
    Earth Storm
    Earth Storm
    Lv. 1/5

    Element is now [Earth]. No longer pulls in foes. Creates a great dust storm. Damage to Challenge foes or lower +30.0%.

    Frost Storm
    Frost Storm
    Lv. 1/5

    Element is now [Water]. For 3.0s, Move Speed of foes hit by the attack -10.0% per stack. At 5 stacks, foes will Freeze for 2.0s. On hit, removes Push and causes Paralysis.

    Lightning Storm
    Lightning Storm
    Lv. 1/5

    Element is now [Lightning]. On Lightning Storm hit, 20% chance of inflicting additional Damage equal to 80.0% of Base Damage with every strike.

  • Level 2
    Growth Attack
    Growth Attack
    Lv. 1/5

    On each tornado winds hit, Damage +7.0% up to 63.0%.

    Wide-Angle Attack
    Wide-Angle Attack
    Lv. 1/5

    AoE Radius +30%.

    Over Revolution
    Over Revolution
    Lv. 1/5

    During skill use, Move Speed +20.0%. Tornado winds duration +1s. Number of attacks +4.

  • Level 3
    Summon Storm
    Summon Storm
    Lv. 1/5

    Changes to Normal mode and removes back attack effect. Slowly calls forth tornado winds from every direction that chases foes for 3s. Damage to foes +40.0%. On hit, Push is removed and inflicts Paralysis.

    Raging Storms
    Raging Storms
    Lv. 1/5

    Tornado winds disperse in a powerful blast. Upon expiring, inflicts additional Damage equal to 60.0% of base skill Damage before knocking foes into the air.

  • Level 1
    Weak Point Detection
    Weak Point Detection
    Lv. 1/5

    Damage to Push-Immune foes +30.0%.

    Final Explosion
    Final Explosion
    Lv. 1/5

    On third explosion hit, outgoing Damage +25.0%.

    Raging Wind
    Raging Wind
    Lv. 1/5

    For every foe hit, Move Speed +1.5% for 5.0s. Stacks up to 10.

  • Level 2
    Lucky Bubble
    Lucky Bubble
    Lv. 1/5

    75% chance to obtain 1 Esoteric Bubble.

    Frost Explosion
    Frost Explosion
    Lv. 1/5

    Element is now [Water]. On hit, Freezes foes for 4.0s.

    Flame Explosion
    Flame Explosion
    Lv. 1/5

    Element is now [Fire]. On hit, Burns foe, inflicting 22 Damage every 1s for 5s. Stacks up to 6 times.

  • Level 3
    Endless Destruction
    Endless Destruction
    Lv. 1/5

    Expands the explosion in three frontal directions. Damage +30.0%.

    Great Explosion
    Great Explosion
    Lv. 1/5

    After the third explosion, another great explosion will occur to inflict Damage equal to 80.0% of Base Damage.

  • Level 1
    Lucky Bubble
    Lucky Bubble
    Lv. 1/5

    30% chance to obtain 1 Esoteric Bubble.

    Single Hit
    Single Hit
    Lv. 1/5

    When attacking a single foe, Damage inflicted +15.0%.

    Quick Prep
    Quick Prep
    Lv. 1/5

    Cooldown -4.0s.

  • Level 2
    Weak Point Detection
    Weak Point Detection
    Lv. 1/5

    Damage to Push-Immune foes +40.0%.

    Tenacity
    Tenacity
    Lv. 1/5

    On skill use, grants Push Immunity.

    Piercing Strike
    Piercing Strike
    Lv. 1/5

    On hit, ignore foe Defense by 50.0%.

  • Level 3
    Charged Kick
    Charged Kick
    Lv. 1/5

    Charges for 1s to attack the foe. When Overcharging, draw upon the great power of the White Tiger to inflict +80.0% Damage. Move Distance +3 meters. If charging fails, Damage -75% and Move Distance -1 meter. Will still paralyze the foe.

    Consecutive Kick
    Consecutive Kick
    Lv. 1/5

    After skill use, use the skill again for an extra attack toward the target location with no preparatory action. Inflicts +50.0% of the base skill Damage.

  1. Unpack the Printer:

    • Remove all packaging materials and tape from the printer. Make sure to follow any setup instructions provided by the manufacturer.
  2. Connect Power:

    • Plug in the power cord and turn on the printer. Wait for the printer to initialize and become ready.
  3. Install Ink or Toner Cartridges:

    • If your printer is an inkjet printer, install the ink cartridges according to the instructions provided. For laser printers, insert the toner cartridge into the designated slot.
  4. Load Paper:

    • Open the paper tray or input tray and adjust the paper guides to fit the size of the paper you're using. Load the paper into the tray and adjust the guides so that they lightly touch the edges of the paper.
  5. Connect to a Computer or Network:

    • Depending on your setup, you may need to connect the printer to your computer via USB cable, or connect it to your network wirelessly or using an Ethernet cable.
  6. Install Printer Drivers:

    • Most printers require drivers to communicate with your computer. Insert the installation CD that came with your printer into your computer's CD drive, or download the latest drivers from the manufacturer's website.
  7. Follow Setup Wizard (if applicable):

    • Some printers come with a setup wizard that guides you through the installation process. Follow the on-screen instructions to complete the setup.
  8. Test Print:

    • Once the printer is set up and connected to your computer or network, print a test page to ensure that everything is working correctly. You can usually do this by right-clicking on the printer icon in the Devices and Printers window on your computer and selecting "Print Test Page."
  9. Configure Printer Settings (Optional):

    • Depending on your preferences and printing needs, you may want to configure additional settings such as paper size, print quality, and color options. You can usually access these settings through the printer properties or preferences window on your computer.
  10. Update Firmware (Optional):

    • It's a good idea to check for and install any firmware updates for your printer to ensure that it's running the latest software and firmware. This can help improve performance and fix any known issues.


By following these steps, you should be able to successfully set up your printer and start printing documents. If you encounter any issues during the setup process, refer to the printer's user manual or contact the manufacturer's support for assistance.


  1. Energy Saving Settings:

    • Explore your printer's energy-saving settings to reduce power consumption when the printer is not in use. You can usually adjust settings such as sleep mode timers and power-off schedules to conserve energy and lower operating costs.
  2. Print Quality Calibration:

    • Calibrate your printer's print quality settings to achieve optimal results for different types of documents and media. Experiment with print quality settings such as resolution, color balance, and saturation to find the best settings for your printing needs.
  3. Duplex Printing (Double-Sided Printing):

    • If your printer supports duplex printing, consider enabling this feature to print on both sides of the paper automatically. Duplex printing can help reduce paper usage and save costs, especially for large print jobs or documents with multiple pages.
  4. Eco-Friendly Printing Practices:

    • Adopt eco-friendly printing practices to minimize environmental impact. Use recycled paper, print in draft mode for non-critical documents, and avoid unnecessary printing whenever possible. Additionally, consider digital alternatives such as electronic documents and online collaboration tools to reduce paper waste.
  5. Printer Connectivity Options:

    • Explore different connectivity options for your printer, such as USB, Ethernet, Wi-Fi, or Bluetooth. Choose the connectivity option that best suits your needs and provides the most convenient and reliable connection to your devices.
  6. Printer Compatibility Checks:

    • Before purchasing a printer, ensure compatibility with your computer, operating system, and software applications. Check the printer's system requirements and compatibility specifications to avoid compatibility issues and ensure smooth integration with your existing technology ecosystem.
  7. Printer Usage Monitoring:

    • Monitor your printer usage and track printing costs to identify areas for optimization and cost savings. Use printer management software or built-in usage tracking features to analyze printing patterns, set printing quotas, and allocate printing resources efficiently.
  8. Printer Recycling and Disposal:

    • When it's time to replace or dispose of your printer, consider recycling options to minimize electronic waste. Many printer manufacturers offer recycling programs or partnerships with recycling facilities to responsibly dispose of old printers and printer cartridges.
  9. Printer Warranty and Support:

    • Register your printer with the manufacturer to activate warranty coverage and access technical support services. Familiarize yourself with the terms and conditions of the printer warranty, including coverage duration, repair or replacement policies, and eligibility requirements.
  10. Regular Printer Maintenance:

    • Incorporate regular printer maintenance tasks into your routine to keep your printer in optimal condition. Clean the printer interior and exterior, remove dust and debris, and perform routine maintenance tasks recommended by the manufacturer to prevent hardware issues and ensure consistent print quality.

By implementing these additional tips and best practices, you can maximize the performance, efficiency, and longevity of your printer while minimizing costs and environmental impact. Whether you're setting up a new printer setup or optimizing an existing one, these strategies can help you achieve optimal printing results and user satisfaction.

  1. Wireless Setup (if applicable):

    • If your printer supports wireless connectivity, you can set it up to connect to your Wi-Fi network. Refer to your printer's user manual for instructions on how to enable Wi-Fi and connect it to your network. Once connected, you'll be able to print from any device on the same network without needing a direct USB connection.
  2. Mobile Printing:

    • Many modern printers support mobile printing, allowing you to print directly from your smartphone or tablet. Download the manufacturer's mobile printing app or use built-in features like Apple AirPrint (for iOS devices) or Google Cloud Print (for Android devices) to print wirelessly from your mobile device.
  3. Printer Sharing:

    • If you have multiple computers or devices on your network, you can share the printer so that everyone can access it. Enable printer sharing in your computer's settings and configure the necessary permissions to allow other users to print to the shared printer.
  4. Automatic Updates:

    • Some printers offer automatic software updates, which can help keep your printer's firmware and drivers up to date without requiring manual intervention. Check your printer's settings menu to enable automatic updates if available.
  5. Cloud Printing Services:

    • Consider using cloud printing services such as Google Cloud Print or HP ePrint to print from anywhere with an internet connection. These services allow you to send print jobs to your printer remotely, even when you're not at home or in the office.
  6. Printer Maintenance:

    • Regular maintenance can help keep your printer running smoothly and prolong its lifespan. Follow the manufacturer's recommendations for cleaning and maintenance tasks such as printhead cleaning, paper tray maintenance, and ink or toner cartridge replacement.
  7. Printer Security:

    • Protect your printer from unauthorized access and potential security threats by enabling security features such as password protection, network encryption, and firewall settings. Keep your printer's firmware and software updated to patch any security vulnerabilities.
  8. Print Management Software:

    • Consider using print management software to monitor and control your printing environment, especially in office or business settings. Print management software can help track printing usage, enforce print policies, and optimize printing workflows for efficiency and cost savings.
  9. Printer Troubleshooting:

    • Familiarize yourself with common printer troubleshooting techniques in case you encounter any issues during setup or regular use. Troubleshooting steps may include checking for paper jams, resolving connectivity issues, updating drivers, and performing maintenance tasks.
  10. Customer Support and Resources:

    • If you need assistance with printer setup or encounter any problems, don't hesitate to reach out to the manufacturer's customer support. Many printer manufacturers offer online resources, FAQs, troubleshooting guides, and live support to help users resolve issues quickly and efficiently.


By incorporating these additional tips into your printer setup process, you can maximize the functionality and performance of your printer while ensuring a smooth and hassle-free printing experience.


  1. Printer Software Features:

    • Explore the software features and utilities provided by the printer manufacturer. Many printers come with bundled software that offers additional functionalities such as scanning, copying, faxing, and photo editing. Take advantage of these features to maximize the versatility of your printer.
  2. Print Preview:

    • Use the print preview feature available in most applications to review your documents before printing. Print preview allows you to check layout, formatting, and content to avoid wasting paper and ink on unnecessary or incorrect printouts.
  3. Custom Paper Sizes and Types:

    • Configure your printer to support custom paper sizes and types for specialized printing needs. Whether you're printing envelopes, labels, or specialty media, adjust the printer settings to accommodate different paper sizes and types accurately.
  4. Print from Cloud Services:

    • Take advantage of cloud printing services to print documents directly from cloud storage platforms such as Google Drive, Dropbox, or Microsoft OneDrive. Link your printer to your cloud storage account and access and print documents seamlessly from anywhere with an internet connection.
  5. Remote Printing:

    • Set up remote printing capabilities to print documents from your mobile device or computer to your printer while you're away from home or the office. Many modern printers support remote printing via email, mobile apps, or cloud-based services for convenient printing on the go.
  6. Printer Security Features:

    • Protect your printer and sensitive information by enabling security features such as password protection, data encryption, and secure printing options. Configure access controls and user authentication to prevent unauthorized access and ensure data privacy and confidentiality.
  7. Automatic Document Feeder (ADF):

    • If your printer is equipped with an automatic document feeder (ADF), utilize this feature for scanning, copying, or faxing multiple-page documents quickly and efficiently. The ADF eliminates the need to manually feed each page, saving time and effort.
  8. Printer Firmware Updates:

    • Regularly check for and install firmware updates for your printer to ensure optimal performance, compatibility, and security. Firmware updates may include bug fixes, performance improvements, and new features to enhance the functionality of your printer.
  9. Printer Productivity Tools:

    • Explore productivity tools and apps designed to complement your printer and streamline printing tasks. Look for apps that offer features such as document management, cloud integration, batch printing, and workflow automation to boost productivity and efficiency.
  10. Printer Training and Resources:

    • Take advantage of training materials, tutorials, and online resources provided by the printer manufacturer to learn more about your printer's features and capabilities. Stay informed about tips, tricks, and best practices for optimizing printer performance and getting the most out of your investment.


By incorporating these additional tips into your printer setup and usage routine, you can unlock the full potential of your printer and enjoy enhanced productivity, convenience, and satisfaction with your printing experience. Whether you're a casual user or a power user, these strategies can help you achieve better results and make printing tasks more efficient and enjoyable.

Sort by:

Comments :1

  • 0

    level 1 Eshley_Bonner

    I’ve been looking into upgrades recently and found it hard to find good deals for high-performance gaming accessories. After some searching, I came across FactoryOutletStore reviews https://factory-outlet-store.pissedconsumer.com/review.html and honestly, it was a game-changer. They offer top-notch electronics at discounted prices, with a range of options that cater to both casual and serious gamers. Their customer service was great too, which always makes the shopping experience a lot smoother. If you’re after good deals and reliable gear, it’s definitely worth checking out.

Write your comments

Insert Image

Add Quotation

Add Translate Suggestion

Language select

Report

CAPTCHA

(1/5)